Ultimaker Print head assembly UMS3/S5 (#SP225661)

Ultimaker Print head assembly 

Deze spare-part is geschikt voor de volgende Ultimaker 3D printers:

• Ultimaker S5
• Ultimaker S3

Ultimaker printhead assembly spare part voor de Ultimaker S5 en S3. Bij deze spare part worden geen printcores bijgeleverd, inhoud van deze assembly: 

• 1 x SP1384      Print Head Cable 
• 1 x SP1388      Bottom Plate
• 1 x SP1391      Print Head Board
• 1 x SP1396      Bearing Housing Middle
• 1 x SP1397      Header Bracket
• 1 x SP1406      Front Fan Cover
• 1 x SP1407      Lifting Ring
• 1 x SP1408      Linear Bearing LMK10L
• 1 x SP1409      Linear Bearing LMK8L
• 1 x SP1410      Side Fan Bracket
• 1 x SP200622  Print Head Cable Cover
• 1 x SP200623  Bearing Housing Top
• 1 x SP2014     Capacitive Sensor Cable
• 1 x SP2015     Capacitive Sensor Board
• 1 x SP203637  Front Fan Bracket S_R2
• 1 x SP203639  Nozzle Seal Adapter S
• 1 x SP203641  Nozzle Seal S
• 2 x SP205923  Front Fan Magnet
• 1 x SP2117      Lifting Switch
• 1 x SP2130      Lifting Ring Spring DR1300
• 1 x SP2131      Print Head Bowden Tube Exit
• 2 x SP2135      Radial Fan 35x35x10
• 1 x SP215431   Axial Fan 35x35x10
• 4 x SP2136      Hot End Magnet
• 1 x SP2138      Lifting Ring Bottom
• 1 x SP2142      DIN 912 M2.5x8
• 4 x SP2144      DIN 912 M2.5x75
• 2 x SP2152      Hex Socket Head Remform Screw 2.5 x 6
• 1 x SP2153      DIN 912 M2.5x35
• 2 x SP2158      Foam Tape
• 2 x SP2163      Magnetic Field Conductor
• 2 x SP2512      Heat Shrink